Table of Contents
Advertisement
4 If you are copying a board or port to the same DTC:
a
Specify the destination board and port (if applicable).
b Press the Action Menu (F5) function key.
This time, select the Paste option. After a few seconds, you will see the
pasted configuration on the new board.
5 If you are copying a board or port to another DTC:
a
Press the Exit Task (F8) function key.
This action takes you to the DTC Configuration Main Menu.
b Choose the Modify DTC Configuration menu item.
c
At the Rear Panel Configuration screen, enter values for the board field (or
port field) that you want to copy. Then press the Action Menu (F5) function
key. A small menu pops up.
d Select the Paste option. After a few seconds, you will see the pasted
configuration on the new board (or port).
Copying and pasting configurations
9
121
Advertisement
Table of Contents
