Verifying The Software Version; If You Don't Want Dtc Manager To Be Started Automatically; Removing Dtc Manager/Ux; Stopping The Daemons - HP 9000 Series 700 Manual

3 Installing DTC Manager/UX with HP-UX 10.x

Verifying the software version

If you don't want DTC Manager to be started automatically

Removing DTC Manager/UX

Caution

Stopping the daemons

Other file-handling features

32
At the prompt, type the following command:
what /opt/dtcmgr/sbin/dtcdiag
You will see a line similar to the following which will show your software version:
DTC Manager/UX: Revision A.14.4A.030 copyright ...
DTC Manager is automatically started by default when your system reboots. You
may want to disable this feature (for troubleshooting for example). To disable
automatic startup you need to modify the
/etc/rc.config.d/dtcmgr
Open the
/etc/rc.config.d/dtcmgr
and change the
START_DTCMGR=1
file.
If you need to remove DTC Manager/UX software from your system use the
swremove utility.
If you use swremove, all DTC Manager files will be permanently removed (you
cannot recover them). This includes all configuration, log and status and upload files.
Use the command
/sbin/init.d/dtcmgr
For information on other file-handling features that you should consider when
installing DTC Manager, see "Managing DTC configuration files" on page 38.
software version
START_DTCMGR
configuration file.
file with your text editor (or use ch_rc)
parameter to
START_DTCMGR=0
stop to stop the program daemons.
parameter in the
and save the