Table of Contents
Advertisement
10
Other dtcmodifyconfs parameter definitions
dtc
board
port
134
The syntax is:
dtc [ board [ port ]]
(Mandatory) The name of the target DTC to modify. This is the same DTC name
you used when you added the DTC using dtcconfig. A DTC name must be from 1 to
8 alphanumeric characters, including hyphens (-) and underscores (_). Note that the
first character must be alphabetic. An asterisk (*) is a wildcard character.
The name or number of the target board to modify. The board parameter is one of
the following:
C or c
CPU/LAN on a DTC 48 or DTC 16.
L or l
LAN on a DTC 72MX or DTC 16TN.
B or b
Board of a DTC 16TN.
0 ... 5
Board number for a DTC 48.
0 or 1
Board number for a DTC 16.
0 ... 3
Board number for a DTC 72MX.
You can also specify a range of boards using a hyphen (-), such as 0-3 for boards 0,
1, 2, and 3.
The number of the port to modify. It is one of the following:
0 ... 7
Direct connect board on a DTC 48 or DTC 16.
0 ... 5
Modem board on a DTC 48 or DTC 16.
0 ... 23
For a 24-port MUX board on a DTC 72MX.
0 ... 15
For a DTC 16TN.
You can also specify a range of ports using a hyphen (-), such as 0-3 for ports 0, 1, 2,
and 3.
Advertisement
Table of Contents
