HP 9000 Series 700 Manual page 55

Modify DTC Configuration screen
tsta195:root:/opt/dtcmgr/sbin
Fill in the DTC 16TN board and port fields and then press "Action Menu" (F5).
|
0
|
Configure LAN Addresses ...
|
8
-------------
Configure Global Parameters ...
|
Configure TCP Parameters ...
|
Configure DNS/IP Parameters ...
Configure SNMP Authorization Filters ...
Configure SNMP/MIB Data Parameters ...
Configure DTC Management Protocol Parameters ...
Board (L = LAN, or B - board):
Help
If you changed any of the following:
• DTC node name
• DTC IP address
• TCP timers
• any of the following SNMP parameters:
• contact name
• sys name
• sys location
• SNMP enable authentication traps
• trap destination IP address
• or DTC management protocol parameters
you must download the new configuration to the DTC.
Rear Panel Configuration
juin
Action Menu
L Port (0 - 15):
tsta195:root
Select
Action
Modifying a DTC configuration
Exit
Window
6
55