Table of Contents
Advertisement
14
Using dtclist
filter
-e [ start
end ]
-d
-u
-n
-p
-s logclass
168
The
parameters specify the type of events to be listed:
filter
The range of events in the event log to be listed with these optional parameters.
If no range is given, all events are listed. To specify the last event of the event
log, use the notation
$
event log, use the options
last event. Also note that the
character for the shell.
For example, the \ backslash is used to escape the
last eleven events.
dtclist -e \$-10
An integer or
start
displayed.
An integer or
end
displayed.
Displays download events. A download is the transfer of software from the host
system to the DTC. A download occurs when the DTC is configured by the
DTC Manager/UX and has been turned on.
Displays upload events. An upload is the transfer of software from the DTC to
the host system. DTC-triggered upload events are also displayed on the system
console.
Displays DTC-generated events.
Displays ping events.
Specifies the event logging class to be displayed. The
be one of the following values:
1
Display catastrophic events.
3
Display cautionary events.
5
Display informative events.
or
. To specify an event relative to the last event of the
e
or
, where
is the number of events from the
$- n
e- n
n
symbol is usually escaped, because it is a special
$
$
or
notation specifying the first event to be
$
e
or
notation specifying the last event to be
$
e
. This command displays the
$
parameter can
logclass
Advertisement
Table of Contents
