Modifying A Dtc Configuration - HP 9000 Series 700 Manual

6 Modifying a DTC configuration

Modifying a DTC configuration

54
1 Run dtcconfig to access the DTC Configuration Main Menu.
2 Select Modify DTC Configuration from the main menu.
3 A pop-up window asks you for the name of the DTC whose configuration you
want to modify.
• Type in a DTC name
or
• Press the Help (F1) function key to see the list of existing DTCs. Highlight
the DTC on the list you want to modify and press Return or the Select Item
(F4) function key.
4 The DTC Rear Panel Configuration screen appears. Enter the board and port
numbers to be modified.
Refer to the online help for detailed explanations of the board and port fields.
5 Press the Action Menu (F5) function key and select the option you want. The
Action Menu varies depending upon the type of DTC or board.
6 When you have finished modifying parameters, press the Action Menu (F5)
function key.
You can then either specify another board and port or exit.
7 To exit, press the Exit Task (F8) function key. You then leave the Rear Panel
Configuration screen and return to the main menu of dtcconfig.