Error Messages - HP 9000 Series 700 Manual

Error messages

All DTC Manager/UX error messages and their descriptions are listed in
files (one for each command) located in the
error file is provided for each DTC command and daemon. You can print or view
these files when you need information on a particular error message.
Following is an example of an error:
<<577>> MESSAGE Name of DTC is already specified
CAUSE the DTC name specified is already on the screen
ACTION specify a unique name for each DTC.
You can display the file in which the error is located as follows:
1 Change to the directory where the error files are located (
2 Use the command grep to display the error information line. For example:
3 Display the contents of the error file using the command vi with the file error
grep 577 *.err;
number (for example,
/577
/opt/dtcmgr/doc/
).
*.err
directory. An
)
/opt/dtcmgr/doc/
201
C