Configuring Your Workstation; Starting The Hp Setup Program; Main Menu - HP Workstation x2000 Getting Started Manual

Configuring Your Workstation
Use the HP Setup program to configure your Workstation (for example:
setting up hardware system and user passwords, installing and
upgrading mass storage devices), and to solve configuration problems.
It is recommended that you take note of any changes to the system setup.

Starting the HP Setup Program

1. Turn on the display and then the Workstation. If the Workstation is
already turned on, save your data and exit all programs, then restart
the Workstation.
2. Press while
F2 F2 Setup
If you fail to press
will need to restart your Workstation and go through the POST again
so you can press
The opening screen of the Workstation's Setup program is displayed. The
Main Menu presents a list of fields, for example, the installed BIOS
version or Date and Time.
A band along the top of the screen offers a list of menus. Select a menu
by using either the left or right arrow keys.

Main Menu

The Main Menu presents a list of fields, including:
• The installed BIOS version
• Reset Configuration Data
• System Time
• System Date
• Key Click
• Key Auto-Repeat Speed
• Delay Before Auto-Repeat
• NumLock at Power-on
By default, "Reset Configuration Data" is set to
system configuration data and return to the default settings.
Chapter 1
Setting Up and Using Your Linux Workstation
is displayed at the bottom of the screen.
in time and the start-up process continues, you
F2
.
F2
Configuring Your Workstation
. Select to clear the
No Yes
27