Software Requirements; Supported Terminals - HP 9000 Series 700 Manual

2
Note
Note

Software requirements

Supported terminals

Note
24
This note only applies to DTC 48s and DTC 16s.
DTC 48s with a date code less than 3110 require a memory extension and must be
upgraded with the DTC 48 Upgrade Kit (HP product 2348A). DTC 48s with a date
code of 3110 or later and DTC 16s do not require a hardware memory extension.
The following DTC-installable cards are not supported on a DTC being managed on
an HP 9000 system by the DTC Manager/UX software:
- X.25 Synchronous Network Processor card
- Telnet Access Card.
Ensure that you have the following software installed and operational on your
HP 9000:
• HP-UX Operating System version 10.x or 9.x for your HP 9000 series.
• Internet Services
• LAN/9000
The following terminals are supported with the DTC Manager/UX:
• HP compatible terminals with programmable function keys and on-screen
display of function key labels
• HP terminals with ASCII mode
• Wyse-30, Wyse-50 and Wyse-60 terminals
• VT100 and VT200 terminals
(The function keys are obtained by pressing the control and F keys
simultaneously, followed by the appropriate key in the range 1 through 8.)
Default terminal with HP Common Desktop Enviroment (CDE) "dtterm" is not
supported. (use "hpterm" with this environment).