Managing Dtc Configuration Files; Automatic Protection Of Configuration Files; Automatic Backup Of Dtc Manager Files; Automatic Upgrade Of Dtc Configuration Files - HP 9000 Series 700 Manual

Using the hp dtc manager/ux
Hide thumbs Also See for 9000 Series 700:
Table of Contents

Advertisement

3
Managing DTC configuration files

Managing DTC configuration files

Automatic protection of configuration files

Automatic backup of DTC Manager files

Automatic upgrade of DTC configuration files

38
The following section contain information on how to manage DTC configuration
files.
An automatic lock feature protects the integrity of the DTCs new data. The lock
mechanism becomes effective when you run update in HP-UX 9.x, swinstall in
HP-UX 10.x, or when a new DTC is added. All DTCs remain operational. However,
certain DTC management and configuration functions are temporarily disabled until
the related DTC is reset (rebooted).
If there is a previous version of DTC Manager software installed on your system, a
special script file will create a backup copy of the old version when you run the
update or swinstall utility. Complete details of the software installation are
recorded in the
update.log
HP-UX 10.x.
You do not have to reconfigure each DTC after upgrading to a new version of
DTC Manager/UX. The DTC configuration files created by older versions are
automatically converted by a utility when you use the command update in
HP-UX 9.x or swinstall in HP-UX 10.x.
Complete details of the procedure for HP-UX 9.x are recorded in the files
and
/tmp/update.log
Complete details of the procedure for HP-UX 10.x are recorded in the files
/usr/adm/sw/swagent.log
file in HP-UX 9.x or the
/usr/adm/dtcupgrade.log.
and
/var/opt/dtcmgr/log/dtcupgrade.log.
file in
swagent.log

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 series 800

Table of Contents