Dns Parameter Definitions - HP 9000 Series 700 Manual

DNS/IP Parameters Configuration screen
Enter the appropriate values in the provided fields and press the Perform Task (F4)
function key when you have finished. You are returned to the Rear Panel
Configuration screen.

DNS parameter definitions

Default Server
Enter the IP address of the default server you want to use. A DNS server resolves
Address system names to IP addresses for the entire network. For example, if you are at a
terminal, you can enter the DTC connect command with a system name instead of
an IP address:
DTC>
Backup Server
Enter the IP address of the DNS server to be used if the default DNS server is not
Address available.
Default Local
Enter the default local domain that you want to use. The DTC uses the specified
Domain local domain name to complete the Domain node name when necessary. If a
terminal user enters a node name without a period, the DTC will complete the node
name with the default local domain name. For example, if the Default Local
Domain is
the DTC will try to connect to
tsta195:root:/opt/dtcmgr/sbin
DNS/IP Parameters Configuration
Fill in or modify the desired fields and then press "Perform Task" (F4).
Domain Name Service:
. . . . . . . .
Default Server Address
. . . . . . . .
Backup Server Address
Default Local Domain
. . . . . . . .
IP Routing:
. . . . .
Default IP Router Address
. . . . .
Backup IP Router Address
Subnet Mask. . . . . . . . . . . . . . . .
Help Select
Action
connect host1.hp.com
and a terminal user enters:
hp.com
DTC> connect host1
Configuring DNS/IP parameters
15.128.128.93
(optional)
15.128.128.50
(optional)
mysys.mycorp
15.128.128.53
(optional)
15.128.128.45
(optional)
255.255.248.000
(optional)
tsta195:root
.
host1.hp.com
7
(optional)
Exit
Window
75