HP 9000 Series 700 Manual page 152

13 About dtcdiag
152
Common DTC diagnostics and related commands
Task
Get connection dtcdiag -S <dtcname> <board> <port>
status for a port or
dtcconnstat <dtcname> <board> <port>
Do a loopback dtcdiag -t <dtcname> <board> <port>
test on a port (terminal port)
dtcdiag -p <dtcname> <board> <port>
(printer port)
or
dtctest -t <dtcname> <board> <port>
(terminal port)
dtctest -p <dtcname> <board> <port>
(printer port)
Reset an entire dtcdiag -r <dtcname> [<board> <port>]
DTC (or a board or
or port) dtcreset <dtcname> [<board> <port>]
Find the status of dtcdiag -s <dtcname> [<LANboard>]
CPU/LAN boards [<board> <port>]
and ports or
dtcstat <dtcname> [<LANboard>]
[<board> <port>]
Test a DTC's dtcdiag -c <dtcname>
LAN board or
dtctest -c <dtcname>
Command to use Command Synonym
dtcconstat
dtctest
dtcreset
dtcstat
dtctest