Table of Contents
Advertisement
The basic steps for configuring the CPU/LAN or LAN board from the Rear Panel
Configuration screen are explained below.
1 Specify the CPU/LAN or LAN Board in the board field of the Rear Panel
Configuration screen.
2 Press the Action Menu (F5) function key for a list of action options (see the
screen below for an example).
Action Menu for CPU/LAN or LAN board of a DTC
Fill in the DTC 16TN board and port fields and then press "Action Menu" (F5).
|
0
|
Configure LAN Addresses ...
|
8
-------------
Configure Global Parameters ...
|
Configure TCP Parameters ...
|
Configure DNS/IP Parameters ...
Configure SNMP Authorization Filters ...
Configure SNMP/MIB Data Parameters ...
Configure DTC Management Protocol Parameters ...
Board (L = LAN, or B - board):
Help
3 Press the Select Action (F4) function key to choose one of the menu items which
are explained in the following sections.
4 A screen appears displaying the current values. Change the values you want to
change and press Done (F4). In some screens, you can choose HP defaults, user-
defined defaults or enter other values. Press the Default Values (F6) function key
to see the HP defaults and user-defined defaults.
Configuring CPU/LAN or LAN board parameters
tsta195:root:/opt/dtcmgr/sbin
Rear Panel Configuration
juin
Action Menu
L
Port (0 - 15):
tsta195:root
Select
Action
7
Exit
Window
63
Advertisement
Table of Contents
