HP 9000 Series 700 Manual page 49

The fields of the previous DTCs scroll upward allowing you to enter more
DTCs. All of the DTCs must be of the same DTC type (DTC 16TN,
DTC 16, DTC 48 or DTC 72MX) and will be set to the same configuration.
Add DTC Configuration screen
Fill in the fields and then press "Perform Task" (F4)
DTC Name DTC LAN Address
mydtc1 08-00-09-0007-40
mydtc2 08-00-09-01-32-12
______ _______________
______ _______________
______ _______________
______ _______________
______ _______________
______ _______________
DTC Type (mark one with an "x"):
x DTC 16TN
Help
Shell
5 When you have completed your list of DTCs, press the Perform Task (F4)
function key. The DTCs in the list are automatically configured and added to the
management database and the Add DTC Configuration screen is cleared.
6 Create another DTC list for another type of DTC on your network.
7 When you have entered all your DTCs, exit from the Add DTC Configuration
screen by pressing the Exit Task (F8) function key.
You are returned to the main menu.
8 Exit from dtcconfig.
9 Turn each DTC's power off and then on (power off/on).
Wait a few minutes for the configuration to be downloaded to the DTC. The
DTC is now operational.
Adding a DTC to the configuration
tsta195:root:/opt/dtcmgr/sbin
Add DTC Configuration
DTC IP Address
15.128.131.90__
15.128.131.72__
______________
______________
______________
______________
______________
______________
_ DTC 16 _ DTC 48
tsta195:root
Perform
Task
DTC Node Name
mydtc1.mysys.mycorp
mydtc2.mysys.mycorp
__________________
__________________ ______
__________________ ______
__________________ ______
__________________ ______
______ __________________
_ DTC 72MX
Exit
Task
49
5