Table of Contents
Advertisement
6
Using the Rear Panel Configuration screen
58
2 Use the arrow key, not the TAB key, to go to the Port field. Enter a port number
depending upon the DTC type. The following port values are valid:
DTC 16TN:
0 through 15 direct connect or modem ports
DTC 16:
0 through 7 direct connect ports
0 through 5 modem ports
DTC 48:
0 through 7 direct connect ports
0 through 5 modem ports
DTC 72MX:
0 through 23 direct connect or modem ports
3 Press the Action Menu (F5).
4 Choose the menu item corresponding to the DTC parameter you want to change.
Refer to chapter 8, to configure ports.
Advertisement
Table of Contents
