Table of Contents
Advertisement
Configuring a DTC port to be a printer port
1 Either logon as
2 Start the dtcconfig utility with the command:
3 Select the Modify DTC Configuration option. A pop-up menu appears.
4 Type the name of the DTC whose port you want to configure as a printer in the
5 If the port you want to use for the printer is already configured as a printer port,
6 Enter the board and port values corresponding to the port you want to configure
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press "Return" or "Select Item" (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Select
Help
Shell
Item
Click here, or press F1 for online help
or type the HP-UX su (superuser) command.
root
dtcconfig
pop-up (or select it from the list displayed with the F1 key) and then press Return
or F4.
The DTC Rear Panel Configuration screen appears showing the boards and
ports and whether the ports are configured as terminal ports (T) or printer ports
(P).
exit from dtcconfig, and go to page 107. If this is not the case continue to the next
step.
as a printer port and press F5.
Configuring a DTC to enable a printer
tsta195:root
DTC Name
Rear Panel Configuration
Board = #, Port = #
Action Menu (F5)
Change Port Type
8
Exit
DTCconf
105
Advertisement
Table of Contents
