Modifying Dtcs With Dtcconfig - HP 9000 Series 700 Manual

Modifying DTCs with dtcconfig
This chapter describes how to modify a single DTC with the interactive dtcconfig
utility. The utility's Modify DTC Configuration menu allows you to modify a
CPU/LAN (or LAN board), board, and/or port of a single DTC.
You can only modify one DTC at a time with dtcconfig. If you want to modify
multiple DTC configurations at the same time, use the dtcmodifyconfs command
(as described in chapter 10).
Note The instructions in this chapter presume that DTC Manager/UX is already properly
installed and that the DTC you want to modify is physically present on the network
and switched on. In addition, it is presumed that you are familiar with the basic use
of the dtcconfig menus and function keys as described in chapter 4.
Once you have modified the DTC, refer to the appropriate chapter to:
•
•
•
modify CPU/LAN board or LAN board parameters for a single DTC (chapter 7)
modify terminal, printer port and other parameters on a board of a single DTC
(chapter 8)
copy DTC board and port configurations (chapter 9).
6
53