HP 9000 Series 700 Manual page 27

6 Use the space bar (or mouse) to highlight the product and then select Mark For
Install from the Actions menu.
A screen appears with information about various dependencies required for the
operation of DTC Manager/UX.
7 Select OK.
Yes appears to the left of the product name.
8 Select Install (analysis)... from the Actions menu.
The Install Analysis screen appears. The system verifies the suitability of the
target environment and displays a Ready status when this task is completed.
9 Select the Logfile option and verify that no errors were recorded during the
analysis phase. Select OK to exit the Logfile screen and then select OK again at
the Install Analysis screen.
A confirmation screen prompts you to confirm your intention to install the
selected product(s).
10 Select Yes to proceed with the installation.
The Install screen appears with a display of installation information.
When the installation is completed, verify that the Status line in the Install
screen displays Completed.
11 Select Logfile... again and verify that no errors were recorded during the
installation process.
12 Select Done to return to the Software Selection screen and then select Exit from
the File menu.
13 Close all applications, log out of the current session, and then log in to a new
session.
DTC Manager/UX software is now installed. Go to the following sections to ensure
that the required daemon processes are present and operational.
Installing DTC Manager/UX with HP-UX 10.x
3
27