Media Empty Condition Detection Control; Tray Open/Close Detection Control; Media Misfeed Detection Control - Konica Minolta bizhub C35 Service Manual

DRAFT
18. Media Feed Section (Tray 2)
18.3.4

Media empty condition detection control

• The media empty message "PAPER EMPTY TRAY2" is displayed on the panel when the
empty sensor actuator unblocks the media empty sensor.
• No mechanism is provided for detecting a media near-empty condition. The media sup-
ply level indicator replaces this function.
When media
is loaded
A media empty
condition
18.3.5

Tray open/close detection control

• The tray2 set sensor detects a tray in the open or closed position.
• The detection plate of tray 2 blocks or unblocks the tray2 set sensor, which allows the
main body to determine that tray 2 is in place or not.
Tray detection
plate
18.3.6

Media misfeed detection control

• If the registration sensor is not activated within a predetermined period of time after a
media feed sequence has been started, the main body determines that there is a media
misfeed. It then gives the message "PAPER EMPTY TRAY 2" on the panel.
• The media misfeed display can be reset by opening and closing any of the doors.
64
Tray2 media empty sensor (PS2)
Tray2 set sensor (PS1)
Theory of operation Ver. 1.0 Feb. 2010
Empty sensor
actuator
A0VDT2C561AA
A0VDT2C640AA