3. Service Mode
3.3
Settings in the License management
3.3.1
Activation
Functions
• To activate i-Option functions.
Use
• To activate i-Option functions with CE.
• The functions can be activated by selecting the desired function and enter the appropri-
ate license code.
• Administrators also can activate i-Option functions through Administrator Settings.
Setting/
See P.8
Procedure
3.3.2
Deactivation
Functions
• To deactivate i-Option functions.
Use
• To deactivate i-Option functions due to registration error, expiration of lease term,
change to other MFP or etc.
• The functions can be deactivated by selecting the desired function and enter the appro-
priate deactivation code.
Setting/
See P.12
Procedure
3.3.3
Repair
Functions
• To repair license management information.
Use
• To be used when license management information is lost due to replacement of
NVRAM board or service EEPROM board or any other trouble.
• License management information can be repaired by acquiring repair code with repair
request code, and entering the repair code.
Setting/
See P.17
Procedure
3.3.4
Initialize
Functions
• To initialize license management information.
Use
• To be used when license management information cannot be repaired.
• License management information should be initialized when the machine fails to gener-
ate request code or repair request code due to any trouble and the information cannot
be repaired.
Setting/
See P.20
Procedure
3.3.5
Request Code
• When the license management error is occured, it will not be displayed until the repair
code is input.
Functions
• To display and print request code and serial number.
Use
• To check the request code and serial number.
Setting/
• Set A4S or 8
Procedure
print.
6
/
x 11S paper to the tray, and press start key at request code screen to
1
2
Field Service Ver. 2.0 Jun. 2008