Temperature/ Humidity Sensor (Tem/Hums) - Konica Minolta bizhub c20 Service Manual

7. Other
7.3.38

Temperature/ humidity sensor (TEM/HUMS)

1. Open the right door.
[1]
[1]
[2]
[3] [1]
[2]
[
108
2. Remove two screws [1], and swing
[1]
A0FDF2C003DA
3. Remove the screw [1] from the sen-
4. Remove the sensor holder [2] as
NOTE
• Do not jerk off the sensor holder, to
which a harness is connected.
A00FF2C110DA
5. Disconnect the connector [1], and
A00FF2C111DA
Field Service Ver. 1.0 Sep. 2008
the right door [2] all the way down.
sor holder [2].
shown on the left.
remove the screw [2], and tempera-
ture/ humidity sensor [3].