Mitsubishi Electric MELSEC-Q/L Programming Manual page 106

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

■Changing indexing with 16-bit index register for indexing with 32-bit index register

For changing indexing with 16-bit index register for indexing with 32-bit index register, check if the program has enough

spaces for indexing.

For indexing with 32-bit index registers, the specified index register (Zn) and the next index register of the specified register

(Zn+1) are used. Be sure not to overlap index registers to be used.

3 CONFIGURATION OF INSTRUCTIONS

3.3 Indexing