Pressure Roller Replacement - Ricoh FT2050 Field Service Manual

August 1, 1985

Pressure Roller Replacement

1. Remove the hot roller.
lacement" section.)
2. Remove the transport belt gear bracket (2
screws).
Remove the 2 idle gears as shown to the right
3.
(1 E-ring each).
4. Remove the rear hot roller bearing.
Remove the transport guide plate (2 screws).
5.
6. Swing the pressure roller cover away from the
pressure roller (2 screws).
7. Remove the pressure roller.
8. Remove the front and rear bushings (1 E-ring
each).
NOTE: * Be careful
roller.
5-28
(See "Hot Roller Rep-
.
not to damage the pressure