Clock Set; Data Comm & Heat Control - Henny Penny LVE-202 Technical Manual

5-2. SPECIAL PROGRAMMING
(Continued)

5-3. CLOCK SET

5-4. DATA COMM &
HEAT CONTROL
Oct. 2010
Auto-Fill Enabled (SP-14)(automatically keeps oil at proper level)
16. Press button and "SP-14 AUTO-FILL ENABLED?"
scrolls in the left display. Use the
right display to "YES" or "NO".
This should always be set to "YES", unless a hardware failure
causes a problem, such as a JIB pump or Add Oil valve failure.
1. Press and hold and
in the display, followed by ENTER CODE.
2. Enter code 1, 1, 2, 2, 1, 1, 2, 2 (first 2 product buttons).
3. "A. TECH" & "RESETS" show in the displays. Press
button twice and "C. CLOCK" and "SET" show in the
displays.
4. Press √ button and "CS-1 ENTER DATE MM-DD-YY"
shows in the left display. Use the product buttons
5. Press button and "CS-2 ENTER TIME" shows in the left
display and the time flashes in the right display. Use the product
buttons
6. Press button and "CS-2 ENTER TIME" shows in the left
display and "AM" or "PM" flashes in the right display. Use the
buttons to change from AM to PM or vice-versa.
7. Press button and "CS-3 TIME FORMAT" shows in left
display and "12-HR" or "24-HR" shows in the right display.
Use the buttons to change from a 12 hour time format
a 24 hour time format or vice-versa.
8. Press button and "CS-4 DAYLIGHT SAVING TIME"
shows in the left display. Use the
daylight saving time for your area: 1.OFF; 2.US (2007 &
after); 3.EURO; or 4.FSA (US before 2007)
Data communications and heat controls settings are shown in
Level 3 Program Mode. But, to ensure proper operation of
fryer, please consult Henny Penny Corp. before changing any of
these settings. For more information on these functions, contact
Service Department at 1-800-417- 8405, or 1-937-456-8405.
5-6
Model LVE-202, 203, 204
and buttons to set the
buttons until LEVEL - 3 shows
to set the date in the right display.
to change the time.
right display to