Passwords; Alert Tone (And Volume) - Henny Penny LVE-202 Technical Manual

4-3. PASSWORDS

4-4. ALERT TONE (and volume)

Oct. 2010
The 4-digit passwords can be changed for access to Set-Up,
Usage, Level 1, Level 2, & Get Mgr.)
1. Press and hold
shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press button twice and "PASSWORD" shows in the
display.
4. Press right √ button and "SET UP" shows in display. The
Set up password can be changed at this time, or press
once to change USAGE password, twice for LEVEL 1
password, 3 times for LEVEL 2 password, or 4 times for
GET MGR password. And then, follow instructions below.
5. If password for the Set Up Mode (for example) is to be
changed, press right √ button and "MODIFY? "YES NO"
shows in display. Press right √ button to change 4-digit
password for Set Up Mode, using the product
buttons
6. Once new password is entered, "CONFIRM PASSWORD"
shows in the display. Press √ button to confirm, or press X
to choose another password.
1. Press and hold
shows in the display, followed by "ENTER CODE".
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press button 3 times and "ALERT TONE" shows in
display.
4. Press right √ button and "VOLUME" shows in the display,
along with volume value. Use product buttons
5. Once volume is set, press √ button and "TONE" shows in
display, along with the tone value. Use product buttons to
6. Press X to exit Alert Tone Mode.
4-3
Model LVE-202, 203, 204
and buttons until LEVEL - 2
.
and buttons until "LEVEL - 2"
to set volume from 1 (softest)
to 10 (loudest).
set the tone from 50 to 2000 Hz.