7-14. FILTER PUMP &
MOTOR (Continued)
Oct. 2010
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
Motor Removal:
1. Open the right door and remove JIB from fryer.
2. Open door to the left of the JIB and remove the drain pan.
3. Using a 1" wrench, disconnect the line at the elbow or tee
on the front of the pump.
4. Using a 1" wrench, disconnect the line at fitting on the rear
of the pump.
5. Using Phillip's-head screwdriver, remove the rear cover
from motor, exposing the wires.
6. Loosen the conduit clamp, disconnect wires, and pull the
wires through the conduit clamp.
7-19
Model LVE-202, 203, 204