Tech Mode - Henny Penny LVE-202 Technical Manual

5-5. TECH MODE

Oct. 2010
The TECH Mode has self-diagnostic information, which can be
used by certified technicians for troubleshooting purposes, such
as:
T-1 • Software
T-2 • Fryer Type (Split or Full/Gas or Elec.)
T-3 • Push-Button Test
T-4 • All-On Display Test
T-5 • Display Segments Test
T-6 • Display Digits Test
T-7 • Display Decimal Points Test
T-8 • LED's Test
T-9 • Left Temp. Probe Calibration & Offset
T-10 • Left Level 1 Probe Calibration & Offset
T-11 • Left Level 2 Probe Calibration & Offset
T-12 • Right Temp. Probe Calibration & Offset
T-13 • Right Level 1 Probe Calibration & Offset
T-14 • Right Level 2 Probe Calibration & Offset
T-15 • CPU Control Temp. Calibration/Offset/Highest
T-16 • View A - D Channel
T-17 • Digital Inputs
T-18 • AIF Info
T-19 • Outputs Test
T-20 • Pumps & Valves Test
T-21 • Change Tech Code?
T-22 • Total Initialization
Not all Tech Mode functions are discussed in this
section. To ensure proper operation of fryer, please
consult Henny Penny Corp. before changing any of
these settings. For more information on these
functions, contact Service Department at 1-800-417-
8405, or 1-937-456-8405.
5-7
Model LVE-202, 203, 204