Henny Penny LVE-202 Technical Manual page 7

Problem
With power switch in
ON position, the fryer
is completely inoperative
(NO POWER)
Oil will not heat
Oct. 201
Cause
POWER SECTION
•
Open circuit
HEATING OF SHORTENING SECTION
•
Blown fuse or tripped
•
Faulty power switch.
•
Faulty cord and plug
•
Faulty drain switch
•
Faulty PC Board
•
High limit control tripped
1-3
Model LVE-202, 203, 204
Correction
•
Check to see that unit is plugged in
•
Check the breaker or fuse
at supply box
•
Check voltage at wall receptacle
•
Check MAIN POWER
switch; replace if defective
•
Check cord and plug
• Reset circuit breakers in fryer
• Reset transformer circuit breaker
•
Reset circuit breaker or replace fuse
at supply box or control panel
•
Check power switch per mainte-
nance section onthe power switch
•
Check cord and plug
• Check power at receptacle
•
Check drain switch per mainte-
nance section on drain switches
•
Check control panel per maintenance
section and replace as needed.
•
Allow heating elements to cool down
(15-20 minutes), reset the high limit
by pressing down and releasing the
raised side of the reset switch for the
vat that is not operating. If high limit
does not reset, replace control.