Clock Set - Henny Penny OFE-391 Operator's Manual

3-4

CLOCK SET

April 2003
Upon initial start-up, or PC board replacement, if
"CLOCK SET" automatically appears in the display,
start with step 4.
1.
Press and hold (PROG►) for 5 seconds until "LEVEL 2"
shows in display.
2. Press (PROG►) and "CLOCK SET", "ENTER CODE"
shows in display.
3.
Press 1, 2, 3.
4.
"CS-1, SET, MONTH", and the month flashes in the display.
5.
Press the ▼▲ to change the month.
6. Press (PROG►) and "CS-2, SET, DATE" shows in the
display, with the date flashing.
7.
Press ▼▲ to change the date.
8.
Press (PROG►) and "CS-3, SET, YEAR" shows in the
display, along with the year flashing.
9. Press ▼▲ to change the year.
10.
Press (PROG►) and "CS-4, SET, HOUR" shows in the
display, with the hour and "AM" or "PM" flashing.
11.
Press ▼▲ to change the hour and AM/PM setting.
12. Press (PROG►) and "CS-5, SET, MINUTE" shows in the
display, with the minutes flashing.
13.
Press ▼▲ to change the minutes.
20