Stats Mode - Henny Penny LVE-202 Technical Manual

5-5. TECH MODE (Continued)

5-6. STATS MODE

Oct. 2010
T-20 - PUMPS & VALVES (Continued)
Press to turn off and on the FILTER light (display shows "FLT*"
when on)
Press to turn off and on the JIB LOW light (display shows
"JLO*" when on)
This mode allows a technician to view advanced information on the
operation of the fryer and controls.
1. To enter the TECH Mode, press and hold
buttons for 5 seconds, until display shows "LEVEL 3",
followed by "ENTER CODE".
2. Enter code 1, 1, 2, 2, 1, 1, 2, 2 (first 2 product buttons). "A.
TECH" & "RESETS" show in the displays.
3. Press 6 times, and when display shows "G. STATS", press
right √ button and "ST-1 LAST RESET ON..." shows in the
display, first step of the TECH Mode. Use and
buttons to toggle through the steps.
ST-1 • Stats Last Reset Date
ST-2 • Fryer Total Running Hours
ST-3 • Left Vat Melt Cycle Hours
ST-4 • Left Vat Cook Cycle Hours
ST-5 • Left Vat Filter Lockout Hours
ST-6 • Right Vat Melt Cycle Hours
ST-7 • Right Vat Cook Cycle Hours
ST-8 • Right Vat Filter Lockout Hours
ST-9 • Power-Ups Count
ST-10 • Errors Count
ST-11 • Left Vat Heat On Hours
ST-12 • Right Vat Heat On Hours
ST-13 • Highest Left Vat Oil Temperature
ST-14 • Highest Right Vat Oil Temperature
ST-15 • Highest CPU Temperature
ST-16 • System RAM Fade Count
ST-17 • Cook RAM Fade Count
ST-18 • Product RAM Fade Count
ST-19 • Stat RAM Fade Count
ST-20 • RAM Data Error Count
ST-21 • Data Total Loss Count
ST-22 • User Intializations Count
ST-23 • Automatic Initializations Count
ST-24 • Cook Counts per Product
ST-25 • Cook Cycle Stop Counts
- "A" = no. of stops in 1st 30 sec.; - "B" = 0; - "C" = 0;
- "D" = complete cook cycles counted
ST-26 • Reset All Stats
5-12
Model LVE-202, 203, 204
and