General Description; Certification; Intended Use - Sirona CEREC MC XL Operating Instructions Manual

3 General description

Certification

24
8
3
General description
3.1 Certification
CE mark SU + inEos
CE mark
This product bears the CE mark in accordance with the provisions of Council
1
Directive 73/23/EEC of February 19, 1973 concerning electrical equipment
designed for use within certain voltage limits.
CAUTION
CE mark for connected products
Further products which are connected to this unit must also bear the CE
mark. These products must be tested according to the applicable
standards.
Examples of CE mark for connected products:
Examples EN 60601 + EN 60950 + UL 60950
● EN 60601-1:1990 + A1:1993 +A2:1995 based on IEC 60601-1
● EN 60950:1992 + A1: 1993 + A2: 1993 + A3: 1995 + A4: 1997 based on
IEC 60950
● UL 60950 third edition 2000
GOST mark
3.2

Intended use

This unit produces computer-aided dental restorations, e.g. from natural-
appearing ceramic material. It must not be used for any other purpose.
If the unit is used for any purpose other than the one mentioned above, it may
Follow the operating instructions
be damaged.
Proper use also includes observing with the present operating instructions
and the relevant maintenance instructions.
NOTICE
Follow the instructions
If the instructions for operating the unit described in this document are not
observed, the intended protection of the user may be impaired.
1. Amended by Council Directive 93/68/EEC.
Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL
61 46 885 D 3439
D 3439.201.02.11.02 10.2009