Technical Description; System Requirements; Milling Unit; General Technical Description - Sirona CEREC MC XL Operating Instructions Manual

8 Technical description

System requirements

Working without the acquisition unit
Working with the acquisition unit
48
8
Technical description
8.1 System requirements
An inLab system PC is required to run this software. The hardware version
must be PC Hardware A or higher.
If you work with the acquisition unit, it must have the hardware status PC
Hardware EA or higher.
8.2

Milling unit

8.2.1

General technical description

Technical description of the milling unit
• Digital feed control with force monitoring for extremely sensitive
processing of ceramic materials
• Process-controlled milling motors
• Positioning step size:
• Milling repeatability:
• Milling speed:
Milling instruments (performance-monitored, backlash-free bearing)
• Grain size:
• Speed:
• Step Bur 12 S
• Step Bur 20 (option, only in connection with inLab 3D software)
• Cyl. Pointed Bur 12 S
• Cyl. Pointed Bur 20 (option, only in connection with inLab 3D software)
Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL
6.25 μm
+/- 25 μm
1.0 - 1.5 mm/min.
64 μm
42.000 rpm
61 46 885 D 3439
D 3439.201.02.11.02 10.2009