Display Description; Lighting Of The Milling Chamber - Sirona CEREC MC XL Operating Instructions Manual

5 Installation and startup
Initial startup
16
5.4.2

Display description

These operating instructions describe how to operate the unit by executing
and confirming commands via your PC.
You can also confirm commands such as
directly on the display of your milling unit.
Possible commands are then shown above the corresponding button on the
display. In the example shown, button 1, (A) would confirm the command
"Start"
and button 4, (D) would confirm the command
Display
A Button 1
B Button 2
C Button 3
D Button 4
5.4.3

Lighting of the milling chamber

The lighting of the milling chamber depends on the maching operation
involved:
Machining operation
Milling
Scan
Operation completed
"Stop"
Error or button pressed
Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL
"Start" "Stop" "Cancel"
, ,
"Stop"
.
E Command
F Display
G ON/OFF switch
Lighting color
white
blue
green
red
61 46 885 D 3439
D 3439.201.02.11.02 10.2009
"OK"
or