Displaying A List Of Effect Registers For Editing - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Displaying a List of Effect Registers for Editing

You can display a list of effect registers including status information (whether

data is present and so on), then carry out lock, copy, delete, and rename

Displaying the list of effect registers with status information

Press the menu title button at the top left of the Effect menu.

The Effect >Status menu appears. The status area shows a list of effect registers

For the same number, the register name for the M/E-1 region takes precedence.

If there is no data for the M/E-1 region, then the register name appears in the

sequence M/E-2 >M/E-3 >P/P >User1 to User8 >DME ch1 to DME ch8

>Device1 to Device12 >P-Bus >GPI >Macro.

Indication colors

Each register has a color-coded border, indicating its status.

Selected register: pale blue border

Write-protecting the contents of the register (lock function)

(This applies to all regions.)

In the Effect >Status menu, use the following procedure.

The following names cannot be used.

CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3,

COM4, COM5, COM6, COM7, COM8, COM9

LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9

are one or more locked regions, the display is in red.

Using any of the following methods, select the register you want to lock.

• Press directly on the corresponding register indication in the status area.

• Turn the knob.

Setting values