EPSON Stylus Pro 4400/4450/4800/4880/4880C
When performing the following work, do not keep the
C A U T I O N
"Carriage, C" too far because harnesses are connected to
the "Carriage, C".
11. Slowly draw the "Carriage, C" to the directions shown in
separate it from the "Carriage, B".
Make sure that the mounting plate of the "Carriage Unit" is in
contact with the one of the "Carriage, C" after installing the
"Carriage, C".
Disassembly & Assembly
Figure 4-111
(Refer to Figure 4-112.)
Disassembly Procedures
to
Figure 4-111. "Carriage, C" Removal
Figure 4-112. Separation from Carriage, B
Carriage, C
Carriage, B
Carriage, C
Printhead
Headrank ID Label
Revision C
289