Cutter Assembly; Cutter Assembly Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.2.3 Cutter Assembly

1. Enter cutter replacement mode using the panel setting with printer power
on.
2. The carriage unit moves and stops at the cutter replacement position.
3. Open "Cover, Printer".
When pressing the "Cutter Assembly" tab in the following
C A U T I O N
steps, press it lightly because the cutter blade could scratch
the interior of the printer if it is pushed inward.
4. Press down on the "Cutter Assembly" tab and turn the "Holder, Solenoid"
in the clockwise direction. (Refer to Figure 4-9.)
5. Remove the "Cutter Assembly" from the "Carriage Unit".
(Refer to Figure 4-10.)
Disassembly & Assembly Disassembly Procedures
Tab
Figure 4-9. Cutter Assembly Removal_1
Figure 4-10. Cutter Assembly Removal_2
Revision C
Holder, Solenoid
Cutter Assembly
211