Remaining Paper Detection; Level Structure Of Remaining Roll Paper Menu; Level Structure Of Remaining Cut Sheet Menu - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

1.4.4.3 Remaining paper detection

This mode displays remaining counter of roll paper length / number of cut sheet
which is set by a user, and can display a warning message when it reaches the
near end setting value which is also set by the user.
However, remaining roll paper menu is displayed when remaining paper
display setting is set to roll paper in Maintenance Mode, and remaining cut
sheet menu is displayed when it is set to cut sheet. When remaining paper
display setting is off, these menus do not appear.
NOTE: Remaining roll paper detection and remaining cut sheet detection cannot
be set to ON simultaneously.

Level structure of remaining roll paper menu

SET ROLL LENGTH
[>]
SET ROLL LENGTH
[>]
[< / >]
PRINTER SETUP SET ROLL LENGTH
ROLL COUNTER
[>]
SET ROLL LENGTH
[∧ / ∨]
Note 1: Roll paper length can be set on 0.5m basis within 5.0 to 99.5m.In addition, the
unit length can be changed on 10m basis by holding down the up/down key.The
near end value can be set on 1m basis within 1 to15m.
2: If the unit length is changed in Maintenance Mode, all the value of roll paper
length, near end, and remaining paper display are returned to the initial
settings.
Product Description
---
[∧ / ∨] "∗" is displayed on
SET ROLL ALERT
the left side of the
screen for two
seconds and then
shifts to near-end
5.0m
setting
[∧ / ∨] automatically
SET ROLL ALERT
[>]
20.0m
[∧ / ∨]
SET ROLL ALERT
99.5m
[>]
"∗" is displayed on
the left side of the
screen after setting

Level structure of remaining cut sheet menu

PRINTER SETUP
CUT SHEET COUNTER
1m
[∧ / ∨]
Note : The number of cut sheet can be set on 10 sheets basis within 10 to 250 sheets.
The near end value can be set on 1 sheet basis within 5 to 50 sheets.
2m
[∧ / ∨]
15m
[∧ / ∨]
Operating Panel
SET SHEET PAGES
[>]
---
[∧ / ∨]
SET SHEET PAGES
[>]
10PG
[∧ / ∨]
[< / >]
[>]
SET SHEET PAGES
100PG
[∧ / ∨]
[>]
SET SHEET PAGES
250PG
"*" is displayed on
the left side of the
[∧ / ∨]
screen after setting
Revision C
SET SHEET ALERT
5PG
[∧ / ∨]
SET SHEET ALERT
10PG
[∧ / ∨]
SET SHEET ALERT
50PG
[∧ / ∨]
[>]
48