Panel, Front/Panel Unit; Panel, Front Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.3.5 Panel, Front/Panel Unit

1. Remove "Cover, Side, Left" (p216).
2. Remove "Cover, Side, Right" (p217).
3. Remove "Harness, Panel" from "Panel Unit".
4. Remove following screws securing "Panel, Front".
C.B.S. 3x6: 1 pc.
C.B.S. (O) 3x6: 8 pcs.
C.B.S. (O) 3x8: 1 pc.
5. Release "Panel, Front" dowel from positioning hole in frame.
(Refer to Figure 4-20.)
6. Remove "Panel, Front" toward you.
Align "Panel, Front" dowel with positioning hole in
frame. (Refer to Figure 4-20.)
Install "Panel, Front" to printer by tightening screws in
the order shown by number in
Disassembly & Assembly
(Refer to Figure 4-21.)
Figure 4-21.
Disassembly Procedures
Step 3
Dowel and Positioning hole
Figure 4-20. Harness, Panel, Connection Status
Panel, Front
2
C.B.S. (O) 3x6
C.B.S. (O) 3x8
7
8
6
C.B.S. (O) 3x6
10
Figure 4-21. Panel, Front Removal
Revision C
Panel Unit
Harness, Panel
C.B.S. 3x6
1
5 4
3
9
219