Epson Stylus Pro 4400 Service Manual page 328

EPSON Stylus Pro 4400/4450/4800/4880/4880C
4.2.8.10 Holder, FFC; B
1. Move the "Carriadge Unit" depending on which "Holder, FFC; B" is
removed with reference to both
"Holder, FFC; B" to be removed
A ~ B
C ~ E
2. Pinch the upper and lower end of the two "Harness, Head"s and the
"Harness, Head, Intermit" with your fingers to make their central parts
bowed, and release them from the upper and lower tabs of the "Holder,
FFC; B".
Bend the "Harness, Head"s and "Harness, Head, Intermit"
C A U T I O N
slowly and carefully so as not to fold them down.
Disassembly & Assembly
Figure 4-170 and the table below.
"Carriage Unit" position
Home position
Left end
Disassembly Procedures
E D
Figure 4-170. Holder, FFC; B
Holder, FFC; B
Figure 4-171. Holder, FFC; B Removal
Revision C
C
B
A
Tabs
328