EPSON Stylus Pro 4400/4450/4800/4880/4880C
4.2.8.9 Holder, FFC
1. Move the "Carriadge Unit" depending on which "Holder, FFC" is removed
with reference to both
Figure 4-166
"Holder, FFC" to be removed
A ~ B
C ~ E
2. Pinch the upper and lower end of the two "Harness, Head"s and the
"Harness, Head, Intermit" with your fingers to make their central parts
bowed, and release them from the upper and lower tabs of the "Holder,
FFC".
To prevent the "Harness, Head"s and "Harness, Head,
C A U T I O N
Intermit" from being bent, bow the "Harness, Head"s and
"Harness, Head, Intermit" little by little.
Disassembly & Assembly
and the table below.
"Carriage Unit" position
Home position
Left end
Disassembly Procedures
E
D
Figure 4-166. Holder, FFC
Holder, FFC
Figure 4-167. Holder, FFC Removal
Revision C
C
B
A
Tabs
325