Auto Uni-D Adjustment; Auto Uni-D Adjustment Screen; Auto Uni-D Adjustment Pattern - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

5.3.10 Auto Uni-d Adjustment

Performs Auto Uni-D Adjustment with the Multi Sensor. When the adjustment
pattern is printed, the adjustment; from scanning the pattern to correcting, is
executed automatically. The pattern is printed at PG=1.2, and the correction
value is automatically copied for other PG settings.
Paper Used
Size: 17"
Type: Enhanced Matte Roll Paper
Procedure
1. Turn the printer on.
2. Start adjustment program and select [Auto Uni-d Adjustment].
3. Click the [Run] button to print the adjustment pattern.
4. As the pattern is printed, the printer automatically scans the pattern
and makes corrections. (This is not necessary when making special
adjustments manually.)
5. Click the [Finish] button.
Figure 5-39. Auto Uni-d Adjustment Screen
Adjustment
VSD1
VSD2
VSD3
Figure 5-40. Auto Uni-d Adjustment Pattern
Basic Adjustment
Revision C
D row
G row
F row
A row
H row
C row
B row
401