Holder, Edge Guide, Left Removal; Roller Assy., Ld, Left Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
6. Detach the resin plate that is attached on the "Holder, Edge Guide, Left",
release the tab that secures "Holder, Edge Guide, Left" to the "Cover,
Roller, LD, Left", and then remove the "Holder, Edge Guide, Left" to the
right. (Refer to Figure 4-67.)
7. Release the tab that secures the "Roller Assy., LD, Left" to the "Cover,
Roller, LD, Left", then remove the "Roller Assy., LD, Left" sliding it
rightward. (Refer to Figure 4-68.)
Disassembly & Assembly
Holder, Edge Guide, Left
Holder, Edge Guide, Left
Tabs
Figure 4-67. Holder, Edge Guide, Left Removal
Figure 4-68. Roller Assy., LD, Left Removal
Disassembly Procedures
Resin Plate
Tab
Revision C
257