Release Unit; Cover, Inner, Release Removal; Plate, P Cover, Right Removal; Paper Feed Mechanism - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.9 Paper Feed Mechanism

4.2.9.1 Release Unit

1. Remove "Cover, Rear" (p223).
2. Remove the screw securing "Cover, Inner, Release".
(Refer to Figure 4-197.)
C.B.S. 3x8: 1 pc.
3. Slide "Cover, Inner, Release" to right side, free the two ribs and remove it
upward. (Refer to Figure 4-197.)
4. Remove the two screws securing "Plate, P Cover, Right" and remove
"Plate, P Cover, Right". (Refer to Figure 4-198.)
C.B.S. 3x6: 2 pcs.
Align "Plate, P Cover, Right" dowel with main frame
positioning hole.
Positioning Hole
Disassembly & Assembly
Dowel
Disassembly Procedures
Ribs
Figure 4-197. Cover, Inner, Release Removal
C.B.S. 3x6
Figure 4-198. Plate, P Cover, Right Removal
.
Revision C
C.B.S. 3x8
Cover, Inner, Release
Plate, P Cover, Right
343