Pf Micro Feed Adjustment (Bi-D) (Tbd) - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
5.4.4 PF Micro Feed Adjustment (Bi-D)
By using the "Paper Feed Adjuster" tool, it is possible to adjust print quality for
papers which are frequently used by users.
"Paper Feed Adjuster" tool works as follows:
Adjustment:
Adjusts "Paper Feed Amount" and "Microweave".
Printing the set values:
Prints the calibration values that are currently applied to "Paper Feed
Amount" and "Microweave".
Initialization of the set values:
Resets the calibration values applied to "Paper Feed Amount" and
"Microweave" to the factory default.
Refer to the help function for use of the "Paper Feed
C H E C K
P O I N T
Adjuster".
Procedure
1. Turn the printer power on.
2. Start the adjustment program, and select [PF Micro Feed Adjustment
(Bi-D)].
3. Click [Run] to start the "Paper Feed Adjuster".
4. Using the "Paper Feed Adjuster" tool, adjust [Paper feeding amount]
and [Microweave].
Adjustment
(TBD)
Advanced Adjustment
Figure 5-91. PF Micro Feed Adjustment (Bi-D)
Revision C
435