Epson Stylus Pro 4400 Service Manual page 341

EPSON Stylus Pro 4400/4450/4800/4880/4880C
11. Release the "Tube, Supply, Ink" from the tabs of the "Holder, Tube, A".
Figure 4-194. Tube, Supply, Ink Release
Disassembly & Assembly
Tabs
Disassembly Procedures
12. Remove the three screws that secures the "Cover, Tube" to the printer
frame, lift it upward, release the three upper tabs, and then remove the
"Cover, Tube".
C.B.P. 3x8: 3 pcs.
Hitch the three tabs on the "Cover, Tube" to the "Guide,
Tube, CR" before tightening with the screws.
Tighten the screws in the order shown in
Tabs
Cover, Tube
2
Figure 4-195. Cover, Tube Removal
Revision C
Figure 4-195.
1 3
C.B.P. 3x8
341