Release Unit Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
12. Remove the two screws securing "Release Unit".
C.B.S. 3x6: 2 pcs.
13. Pull right side of "Release Unit" toward you, completely remove the right
side of "Release Unit" while freeing the "Release Unit" ribs from the printer
frame cut-out, and then remove the "Release Unit" from the printer body.
(Refer to Figure 4-204.)
Disassembly & Assembly
(Refer to Figure 4-204.)
Disassembly Procedures
Release Unit
C.B.S. 3x6
Dowel and Positioning Hole
Figure 4-204. Release Unit Removal
Revision C
Step 13
C.B.S. 3x6
Ribs Cutout
Dowel and Positioning Hole
347