Epson Stylus Pro 4400 Service Manual page 308

EPSON Stylus Pro 4400/4450/4800/4880/4880C
When performing the following step, be careful not to bend
C A U T I O N
the "Tube, Supply, Ink" or scratch it with the edge of the
frame.
8. Peel acetate tape and release the four "Tube, Supply, Ink" from the notch
of the frame. (Refer to Figure 4-141.)
Secure "Tube, Supply, Ink" to the frame with acetate
tape.
The "Tube, Supply, Ink" should be slackened to the
direction (center of the printer) as shown in
Disassembly & Assembly
Tube, Supply, Ink
Figure 4-141.
Disassembly Procedures
Acetate Tape
Notch
Slack Direction
Figure 4-141. Releasing the Tube, Supply, Ink
Revision C
308