Adjustment Program Basic Operation; Start-Up; Sequential Mode; Individual Adjustment Mode - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

5.1.7 Adjustment Program Basic Operation

This section describes basic methods for operating the adjustment program.
The adjustment program includes adjustment items to be
C A U T I O N
used other than on-site. Regarding on-site repairs, do not
execute adjustments other than those described in this
manual.
Operating Environment
OS: Widows 98, Me, 2000, XP
Port: USB port
Printer driver and ESM3 have to be installed.

Start-up

1. Double-click [adjwiz2.exe] to start the adjustment program.
2. Select the following items after the startup screen appears.
Printer name
Select the model of the printer in use.
Adj. Mode
Select whether to execute adjustments with the sequential mode
(Sequence) or to execute each adjustment individually (Individual).
3. Click [Start].
Figure 5-1. Adjustment Program Startup Screen
Adjustment

Sequential Mode

This is a guide mode for executing the required adjustments in a set order
when a replaced part or unit is selected.
1. Select the replaced part or unit from the left column and click [Add].
2. Click the [OK] button.
Figure 5-2. Sequential Mode Screen

Individual Adjustment Mode

This is a mode for executing each adjustment item individually.
1. Select the adjustment item to be executed and click the [OK] button.
Figure 5-3. Individual Adjustment Mode Screen
Overview
Revision C
375