Edge Guide Unit Removal - Epson Stylus Color 1520 Service Manual

3.2.10.6 Edge Guide Unit Removal

1. Remove the printer mechanism unit. (Refer to Section 3.2.6.)
2. Release the joints for the edge guide unit and the right and left paper loading roller slide covers.
3. Remove 2 flange nuts (M4) securing the edge guide unit to the left and middle frame assemblies. Then
remove the edge guide unit.
Main Bottom Frame
Left Slide Cover
Left Frame Assembly
Flange Nut
;
When installing the edge guide unit to the printer mechanism unit, engage the damper pinion with the
rack on the release transmission lever.
;
When installing the edge guide unit on the printer mechanism unit, engage the edge guide unit with
the main bottom frame, as shown in the figure below.
;
Secure the flange nuts with adhesive after fastening them. (Refer to Chapter 6.)
Right Slide Cover
Figure 3-18. Edge Guide Unit Removal
WORK POINT
Disassembly and Assembly
Middle Frame Assembly
Flange Nut
Damper
Edge Guide Unit
Rack
3-21