Danfoss VLT FC 100 Operating Instructions Manual page 32

VLT HVAC Drive High Power Operating In-
structions
Terminal locations - Frame size E2
Take the following position of the terminals into consideration when designing the cable access.
186[7.3]
17[0.7]
Illustration 3.18: IP00 enclosure power connection positions
Illustration 3.19: IP00 enclosure power connection positions
FASTENER TORQUE M8 9.6 Nm (7 FT-LB) FASTENER TORQUE M8 9.6 Nm (7 FT-LB)
R/L1 91 S/L2 92 T/L3 93
9 U/T1 96 V/T2 97 W/T3 98
A
R 81
A
147(5.8)
0(0.0)
MG.11.F3.02 - VLT ® is a registered Danfoss trademark
0[0.0]
A A A
019Nm (14 F)
9
3 Mechanical Installation
3
31